|
PointMaster V5
Reverse Engineering and Verification Software |
| |
MobileScan3D is supplied as standard with our own
PointMaster V5 Foundation Scanning Module. Additional
application modules can be added at a future point for
reverse engineering or verification of scan data against
nominal CAD data.
|
|
| PointMaster for Reverse
Engineering Parts from Point Clouds |
| |
 |
| |
Easy to Use |
|
| |
The user sketches topological edges
interactively. The optimum boundaries of the curves in
this area are calculated using the geometry navigator
and an approximation of the surface is created. At the
press of a button, combined surfaces can be connected
with C2 continuity. |
|
| |
One of PointMaster‘s major plus points is the visual
assistance provided by the interactive ‚feature
shading‘. This displays both artefacts and any areas of
discontinuity, as well as feature lines, which are the
key for surface segmentation. New functions such as
surface trimming by use of B-spline curves, importing
surfaces created in CAD systems for surface
reconstruction and geometric feature recognition round
off the wide range of new features in PointMaster
version V 5.0. |
|
| |
|
|
| |
-
Key features of the surface
reverse engineering module in brief:
-
Interactive ‚Feature Shading‘
-
Feature line extraction
-
Concept Strak Surfaces‘
-
C2 continuity across all
adjacent surfaces
-
C2 continuous T-connections
-
3-sided patches
-
Real-time analysis
-
CAD surface boundaries can be
used for the reconstruction
-
Surface trimming
-
Automatic geometric feature extraction Planes,
cylinders, cones, spheres and torus.
|
|
| PointMaster for Verification
of Parts against CAD Model |
|
The user transforms the measured data (scan data) into
the coordinate system of the reference object (CAD
data), starts the analysis and obtains as a result a
deviation map (all deviations measured are shown in
colour). |
|
| |
The deviation map can be switched to a configurable
tolerance map. Measurement points can be picked up
directly from the object being analysed and exported
into an inspection report. ‘Virtual measurement machine‘ |
|
| |
Key features of the verification module in brief:
-
Object alignment
-
Nominal/actual value
comparison
-
Deviation mapping
-
Interactive tolerance mapping
-
Statistical analysis of
measured data
-
Automatic generation of
measurement reports in
standard formats
-
Measurement of tomography data
(CT scan data)
-
Import interfaces for IGES,
STL and many
-
Point Cloud formats
|
|
| |
For more information about
PointMaster V5 and to receive the brochure, please use
our contact page |
|
|
|
|
|
